|
 The XDS95 from X2 delivers your tone and performance with the sound and feel of a direct wire connection - all at a price that won't break the bank.
Features include: 24-bit digital converters yielding 117 dB dynamic range to capture your most expressive performances without the use of companders, five  simultaneously compatible channels, frequency response all the way down to 10 Hz for truly thundering lows, TRS 1/4" output for instrument and full-bandwidth or 'tuner out' applications, and a five segment LED display (battery status, link status, audio level and channel).
Operating the system is unlike any wireless you've tried before. Simply connect the transmitter to the source via the 1/8" threaded-collar locking connector and the "stomp-box" style receiver to your amplifier, mixer or pedal-board. Then power up making sure the transmitter and receiver are set to the same channel. That's it. You're ready to go! No knobs to adjust and no antennas to loose or break mean you're up and running in approximately the same time it takes to connect a cable.
SYSTEM CONTAINS:
• Digital UHF bodypack transmitter
• Digital UHF 'stomp-box' receiver
• Instrument cable
• Users guide and all necessary batteries
|
SPECIFICATIONS:
|
|
|
|
Frequency Response (± .5dB):
|
|
10 Hz - 12 kHz
|
|
Audio Dynamic Range:
|
|
Greater than 117 dB
|
|
Distortion:
|
|
0.03% THD
|
|
Compatible Channels:
|
|
Five
|
|
RF Output Power:
|
|
10mw
|
|
Operating Range:
|
|
150' line-of-sight (may vary due to local conditions)
|
|
 |
|
|
|
|
|
|
|
|
|
|
Optional Accessories:
|
|
|
 |
|
The XC2 premium cable features Canare wire with Neutrik and Switchcraft ends.
|
XC2
|
|
|
|
|
|
|
|
|
 |
|
The XC3R right angle cable features Canare wire with Neutrik and Switchcraft ends.
|
XC3R
|
|
|
|
|
|
|
|
|
 |
|
The XAC2 adapter converts AC wall current to 9 volts DC current and is recommended for use with the XDR1 stomp-box digital receiver.
|
XC3R
|
|
|
|
|
|
|
|
|
